Moin,
wie habt ihr den MiniPyro an die Alu-Motorhalterung des Logo 400 angeschraubt ohne den den Motor diagonal (Lochabstand) zu verschrauben und die Motorkabel so hässlich zu verbiegen? Beim Strecker konnte ich die Kabel schön gerade unter der Halterung vom Jive hindurchführen...
Gruss
MacD
Logo 400 und Mini Pyro
#1 Logo 400 und Mini Pyro
Henseleit TDR; VStabi 5.0; Jive 80 HV; Pyro 700-52; EDGE 693; EMCOTEC SPS; EMCOTEC DPSI Micro; Telemetrie (rpm, U/I, ºC, m de altura), GPS (SM-Modellbau), 12s NanoTech 4000 mAh, 2s LiPo EMCOTEC 2000 mAh.
Logo 500 VStabi 5.0; EMCOTEC SPS; MANIAC 550
Radio: MULTIPLEX RoyalPro 9 2,4 GHz
Logo 500 VStabi 5.0; EMCOTEC SPS; MANIAC 550
Radio: MULTIPLEX RoyalPro 9 2,4 GHz
#2 Re: Logo 400 und Mini Pyro
Hallo,
mach doch mal ein Foto wie du es bei dir hast !
Gruß
mach doch mal ein Foto wie du es bei dir hast !
Gruß
Es fliegt und ist Made in Germany
Wenn Windows die Lösung ist, möchte ich bitte das Problem wieder haben !
Piccolo V2
Logo400 wid gestretscht
Wenn Windows die Lösung ist, möchte ich bitte das Problem wieder haben !
Piccolo V2
Logo400 wid gestretscht
#3 Re: Logo 400 und Mini Pyro
... hab ich ja eben noch nicht eingebaut, da ich auf eine Idee von mir und Euch warte
Henseleit TDR; VStabi 5.0; Jive 80 HV; Pyro 700-52; EDGE 693; EMCOTEC SPS; EMCOTEC DPSI Micro; Telemetrie (rpm, U/I, ºC, m de altura), GPS (SM-Modellbau), 12s NanoTech 4000 mAh, 2s LiPo EMCOTEC 2000 mAh.
Logo 500 VStabi 5.0; EMCOTEC SPS; MANIAC 550
Radio: MULTIPLEX RoyalPro 9 2,4 GHz
Logo 500 VStabi 5.0; EMCOTEC SPS; MANIAC 550
Radio: MULTIPLEX RoyalPro 9 2,4 GHz
- bastiuscha
- Beiträge: 5720
- Registriert: 25.05.2005 23:17:30
- Wohnort: Gardelegen
#4 Re: Logo 400 und Mini Pyro
frag bei Rc Heli... da haben den viele drin
mfg Basti
Ein weiteres Hobby von mir: http://sebastiansell.bplaced.net/
Experience is the best teacher
Ein weiteres Hobby von mir: http://sebastiansell.bplaced.net/
Experience is the best teacher