Probleme mit Futaba T8 beim Phönix Sim
#1 Probleme mit Futaba T8 beim Phönix Sim
Hi!
Meine T8 steuert den Roll Kanal unter Phönix nicht !
Alle anderen Kanäle werden erkannt und funktionieren auch, nur halt Roll nicht!
Hat einer ne gute Idee woran das liegen könnte ?
Danke, Uli
Meine T8 steuert den Roll Kanal unter Phönix nicht !
Alle anderen Kanäle werden erkannt und funktionieren auch, nur halt Roll nicht!
Hat einer ne gute Idee woran das liegen könnte ?
Danke, Uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
#2 Re: Probleme mit Futaba T8 beim Phönix Sim
Hi Uli.
Hast Du mal meinen Tipp aus dem anderen Thread die Funktionszuordnung zu ändern ausprobiert? Was für einen Modelltyp hast Du eingestellt?
Hast Du mal meinen Tipp aus dem anderen Thread die Funktionszuordnung zu ändern ausprobiert? Was für einen Modelltyp hast Du eingestellt?
#3 Re: Probleme mit Futaba T8 beim Phönix Sim
Hi1
So, hab mich eben nochmal an den Sim gemacht und krieg es einfach nicht eingestellt!
Modelltyp Heli H 1 , 1 servo 90 Grad !
wenn ich die Zuodnung von J1 und J2 tausche funktioniert danach Roll, aber Nick nicht mehr !
Das gleiche unter Heli-X 3.0 !
Wenn ich H3 mit 3 Servos 90 Grad eingebe habe ich Ausschläge auf allen kanälen, aber natürlich wild gemischt !
Hm, ich weiss nicht mehr weiter !
Danke, uli
So, hab mich eben nochmal an den Sim gemacht und krieg es einfach nicht eingestellt!
Modelltyp Heli H 1 , 1 servo 90 Grad !
wenn ich die Zuodnung von J1 und J2 tausche funktioniert danach Roll, aber Nick nicht mehr !
Das gleiche unter Heli-X 3.0 !
Wenn ich H3 mit 3 Servos 90 Grad eingebe habe ich Ausschläge auf allen kanälen, aber natürlich wild gemischt !
Hm, ich weiss nicht mehr weiter !
Danke, uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
- Raptor-Flyer
- Beiträge: 3357
- Registriert: 15.10.2009 14:14:52
- Wohnort: NRW, Herten
#4 Re: Probleme mit Futaba T8 beim Phönix Sim
Ich glaub du musst auf Flugzeug stellen, oder so... Is bei der FF-7 so
Raptor E620|E720|G4|50 Titan|MT E325SE|MT E325|Logo 600SE|HK 450|Goblin 700
Controlled by Futaba T8FG; Futaba T8FG Super
Graupner Ultramat 18; Junsi iCharger 1010+
Powered by Turnigy, Zippy, Rhino, SLS& Eneloop
YouTube: KLICK MICH!
Controlled by Futaba T8FG; Futaba T8FG Super
Graupner Ultramat 18; Junsi iCharger 1010+
Powered by Turnigy, Zippy, Rhino, SLS& Eneloop
YouTube: KLICK MICH!
#5 Re: Probleme mit Futaba T8 beim Phönix Sim
Jau, hat mein kumpel mir auch gerad gemailt das seine FF-7 auf Fläche steht ....
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
#6 Re: Probleme mit Futaba T8 beim Phönix Sim
Funktioniert trotzdem noch nicht ....
So ein Mist, aber ich fummel noch weiter !
Uli
So ein Mist, aber ich fummel noch weiter !
Uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
#7 Re: Probleme mit Futaba T8 beim Phönix Sim
Dann leg doch Roll mal auf nen höheren Kanal. Für den Heli brauchst Du ja nicht alle Kanäle.Uli4g3 hat geschrieben:wenn ich die Zuodnung von J1 und J2 tausche funktioniert danach Roll, aber Nick nicht mehr !
#8 Re: Probleme mit Futaba T8 beim Phönix Sim
Ist es nicht, nur wenn die Funke nicht richtig eingestellt ist.Raptor-Flyer hat geschrieben:Ich glaub du musst auf Flugzeug stellen, oder so... Is bei der FF-7 so
Es wird nicht richtiger, nur weil man es öfter lesen kann.
#9 Re: Probleme mit Futaba T8 beim Phönix Sim
Ich krieg es nicht eingestellt!!! Irgend was passt nicht, ich weiss aber nicht warum.
Entweder funktioniert es mit dem Kabel nicht, oder ich hab noch was falsch eingestellt!
Mit dem USB-game Commander läuft esd einwandfrei!
Mist ,...
Uli
Entweder funktioniert es mit dem Kabel nicht, oder ich hab noch was falsch eingestellt!
Mit dem USB-game Commander läuft esd einwandfrei!
Mist ,...
Uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
#11 Re: Probleme mit Futaba T8 beim Phönix Sim
Jau!
Erkennt Roll trotzdem nicht.
Uli
Erkennt Roll trotzdem nicht.
Uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
#12 Re: Probleme mit Futaba T8 beim Phönix Sim
Uli, Du hattest doch geschrieben, dass nach dem Tausch von Roll mit Nick dann eben Nick nicht mehr ging. Ich gehe davon aus, dass Dein Kabel einfach den ersten Impuls aus welchem Grund auch immer nicht richtig erkennt. Wenn Du einfach mal Roll auf einen höheren Kanal legen würdest, dann sollte es doch gehen.
BTW: hast Du mal nachgesehen was passiert, wenn Du den Schülermodus aktivierst? Bei mir geht das so, aber auch nur dann, wenn ich auf 8-Kanal Schüler schalte.
BTW: hast Du mal nachgesehen was passiert, wenn Du den Schülermodus aktivierst? Bei mir geht das so, aber auch nur dann, wenn ich auf 8-Kanal Schüler schalte.
#13 Re: Probleme mit Futaba T8 beim Phönix Sim
Oh man, ich Depp....
Sorry Egbert, ich wusste irgendwie nicht genau was Du meintest und hab immer nur was anderes umgestellt....
Hab Roll jetzt auf Kanal 5 gelegt und jetzt läuft es einwandfrei !
Danke nochmal, uli
Sorry Egbert, ich wusste irgendwie nicht genau was Du meintest und hab immer nur was anderes umgestellt....
Hab Roll jetzt auf Kanal 5 gelegt und jetzt läuft es einwandfrei !
Danke nochmal, uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
#15 Re: Probleme mit Futaba T8 beim Phönix Sim
Jau, manchmal sieht man den Wald vor lauter Bäumen nicht ....
Uli
Uli
T-Shrink....
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de
Compass Warp 360
Compass 6HV Ultimate Nightfly : Compass Motor mit Jive 80 Pro HV, HBL 950 auf TS, MKS HBL 980 auf Heck, TracX mit Futaba S-Bus...
Compass 7HV FBL: Compass Stock Motor ( der neue SZ ), Jive 120 HV, HBL 950, MKS HBL 980, TRacX mit Futaba S-Bus...
alles mit Futaba T14SG und S-Bus Empfänger ....
Dymond X-Treme Power 2x400 Watt Lader
Compass/MTTEC Fieldrep
unterstützt von:
http://www.Helitec-magic.de
http://stefansliposhop.de
http://www.heli-team-owl.de